Cold water filtration kit for kitchen 1 micron under sink

FILTRATION UNDER SINK 1 MICRON + ACCESSORIES

Filtration under sink on an island or in remote areas where the quality of drinking water is irregular.

This complete system is designed to be installed under your kitchen sink to filter cold water from your water network to be used to wash vegetables, cook pasta or even before a purifier with activated carbon for drinking.
The fittings provided will fit your existing copper installation which is 3/8 inch (12/17). It will just be necessary to add to this filtration kit the length of tube necessary to connect everything. We offer 3/8 inch white or blue food tube.

Quick couplers allow 3/8 inch tubing to be connected securely and easily. The valve will be installed just before the filter to be able to make the water inlet when replacing the cartridge without cutting off the general supply.

You will not be able to use this filtration with an activated carbon to use in drinking water directly, because the tap will always contain traces of chlorine and other substances left by the unfiltered hot water. This system only allows pre-filtering water to be made pure with a new filter or for use where traces of impurities must be avoided.

Composition of the filtration kit:
- Tank filter holder 9-3 / 4 inches I / O 1/2 + Key
- 9-3 / 4 inch 1 micron pleated cartridge
- 3/8 inch fittings and valve