Purifier filter housing Transparent - Inlet 3/8 inch

OSMOSIS FILTER HOUSING TRANSPARENT - BETWEEN IN/OUT 3/8 INCH (without cartridge)

Filter housing 9-3/4 inches with transparent for filtering tap water of the original kitchen bowl.

It is installed in the extension of the copper pipe diameter 3/8 inch.
It is necessary to provide flexible 3/8 inch male to screw the inlet and outlet of the filter holder.
All cartridges can be installed on the filter system, taking account of the filtration fineness fonction pressure.

If your water system is rather loaded in suspended solids, should be put an anti-sediment 9-3/4 inch cartridge, to make it more clear.
If you encounter problems of poor taste or odor, it is preferable to an activated carbon cartridge block.
In both cases, the cartridge will change all around the year.

The filter housing can be installed in the bathroom, under the sink for brushing teeth.

With an input of 3/8 inch, the diameter is the same as your copper pipe.
The support is not provided, which gives the choice to take or not to the type of installation.

Dimensions purifier :
Height : 9-3/4 inch
Suitable cartridges : 9-3/4 - 10 inches = 248 mm
Transparent bowl with UV protection
Equipment provided : standard round key