Purifier filter housing white - Inlet 3/8 inch

PURIFIER FILTER HOUSING WHITE - IN/OUT 3/8 INCH (without cartridge)

Filter housing with bracket for supplying filtered water tap of the original kitchen.

The purifier is very useful in areas where water quality is different depending on the rains or floods.

When the water is muddy, so busy, just put an anti-sediment 25 micron or 5 micron cartridge in some cases.

In cases where the water has a bad taste, it will be necessary this time an activated carbon cartridge.

The entry of 3/8 inch, allows the filter housing, connect directly to the water supply foide before leaving the tap.

The advantage is to use a good quality water to wash dishes, cook pasta or drink.

The filter housing is provided with a support and a release key to be used for changing the cartridges yourself.
As against it does not have filter cartridge.

To connect to the water line, you can use connections 3 /8 inch on our site, or use those present in large DIY.

Dimensions purifier :
Height : 9-3/4 inch
Suitable cartridges : 9-3/4 - 10 inches = 248 to 252 mm
Opaque white bowl
Equipment provided : square steel support + standard round key