Purifier filter housing white - Inlet 3/8 inch

OSMOSIS FILTER HOUSING WHITE 10 INCHS - IN/OUT 1/4 INCH (without cartridge)

Filter housing white 9 3/4 inches with 1/4 input component of the filters of a domestic omoseur.

It can receive a sediment cartridge or a carbon block 9 3/4 inches necessary for prefiltration before the 50 GPD membrane cartridge.

The filter housing is sold without a cartridge to choose the cartridge you need.
For input 1/4, there must be a quick coupling screw thread with a straight or angled 1/4 inch. Then you can replace the junction with a second filter housing by installing a 1/4 inch connector male-male.
The filter housing can also be used to mount a purifying oneself under the sink for drinking water quality.

It is advisable to put a 5-micron sediment filter smooth as the first filtration for drinking water, to keep up the properties of the carbon filter that follows.

The filter housing is provided with his key to open the bowl when replacing cartridges.
It has 4 holes on its head for the screw on the support of osmosis. If you want to use as a purifier, it will provide the white metal wall bracket.