Transparent filter housing 9-3/4 Inch + Manometers - Input 3/4

FILTER HOUSING TRANSPARENT 9-3/4 INCHES WITH 2 GAUGES : INPUT 3/4 INCH BRASS

Special filter housing impurities with a pressure gauge with transparent tank for 9 3/4 inch cartridges.

It filters your installation solids present in your drinking water.
The screw-gauge on the filter head tells you about the pressure at the inlet.
This filter housing is compatible with all of our filter cartridges of 248 mm.
It is of French manufacture with ACS certification, to ensure food quality for the filtration of water Boison.
The transparent tank can check the status of the cartridge.

To open it, simply take the clamping wrench to unscrew the crown.
For a rough pre-filtration, you can choose between a cartridge Puromelt 50 microns or 60 microns washable. If you need to filter finer, the 25 microns will be sufficient with a household softener.
In case you want to add a second filter housing, we recommend using the male nipple 3/4 offered by the manufacturer.

Maximum pressure : 7 bar at a temperature of 20°C
Maximum operating temperature : + 5° to + 45°C at a pressure of 3 bar