Transparent filter housing 9-3/4 Inches - Entry 3/4 inch

FILTER HOUSING 9 3/4 INCHES TRANSPARENT - ENTRY PPH Plastic 3/4 INCH

Filter housing 9 3/4 inches with transparent plastic inlet and pressure relief cap.

The filter housing is transparent to control, through the saturation of the filter cartridge spun or wound.
The entrance is 3/4 inch threaded brass insert without for specific applications in the fields of filtration where the connection to the circuit is PVC.
It is possible to put on each side a 3/4 plastic male nipple for arrival in female.

This filter holder is compatible with all washable and disposable Dirt from 1 to 100 microns cartridges.
It has been tested to 10 bar pressure. The vent screw allows to get air into the filter housing when replacing the cartridge, to view the disassembly wrench without a problem.

The fact that it is transparent to the advantage to view the status of the cartridge before replacing it.
The French-made filter holder is certified ACS to ensure better food quality.

Compatible cartridges : 9 3/4 inches = 248 mm

PPH entry : 3/4 = 20-27 mm
Mounting wrench and plastic support provided for a perfect installation of the equipment.