Cartridge Carbon Block Chlorine Plus 20 Inches 1 Micron

20 INCH 1 MICRON CHLOR-PLUS CARTRIDGE

20 inch charcoal cartridge intended for the removal of chlorine and pesticides for city water.

It has the particularity of strongly filtering the chlorines and chloramines present in the water, thanks to its filtration capacity of 1 micron. It fits the classic 20-inch filter holder. For a 20 inch Big Blue filter holder, the specific model will be required.
Its structure retains very fine sediments, including the fine carbon particles found in many granular coatings.
 It is suitable for a large number of domestic and industrial applications, for the treatment of drinking or drinking water. It is possible to use it in the food industry to prepare dishes, in certain cases where the chlorine must be removed.

Application areas :
General filtration, drinking water purifier, water filtration before the tank, boat fittings, domestic osmosis system.

The filtration efficiency of this cartridge is 85% nominal.
The performance depends on the correct sizing of the treatment system. For an initial concentration of 2 ppm under 460 L / H, the Chlor-Plus cartridge reduces the rate of free chlorine below 0.5 ppm for a volume of 380 m3 of treated water and below 0.1 ppm for a volume of 350 m3 water.

Technical characteristics :
- Operating temperature 5 to 51.7°C
- Activated carbon in extruded powder: charcoal
- Polypropylene tips
- Seals: Santoprene
- Filtration degree: 1 nominal micron

Dimensions of the cartridge :
- Length: 508 mm
- Width: 73 mm