Semi-automatic self-cleaning filter Easyauto - Entrance 2 inch

EASY SELF-CLEANING FILTER DN 50 : In/Out 2 inches

Self-cleaning 2-inch inlet filter to treat water from the domestic network in the factory.

This filter model makes it possible to retain silt, sand, mud where the water has a significant turbidity on city water or water analyzed with a stable quality all year round. It is possible to put larger micronage cartridges up to 500 microns. The cartridge is made of 316 stainless steel and can be cleaned using manual backwashing. Impurities are collected by the purge valve located at the base of the filter.
All the junction pieces are made of brass (ring, fitting).

The filter is very practical for drilling and sprinkling water. It is also a solution for filtering rainwater stored in the underground tank.
It is an ecological filtration system with low pressure drop.
It is possible to fix it horizontally or vertically.
We recommend performing a regular backwashing of the cartridge, to remove all impurities, every month to avoid having to do it when it is completely saturated.

It is possible to fix it horizontally or vertically, because it has a connection that allows it to be rotated through 360 °.

We recommend performing a regular backwashing of the cartridge, to remove all impurities, every month to avoid having to do it when it is completely saturated.
It is possible to replace the original cartridge with a 50 micron or 200 micron 316 stainless steel sieve cartridge.

This type of filtration can be used to retain larger impurities in a borehole water before passing through conventional cartridge filters.

Features of the 50/60 filter :
- Maximum flow rate: 9.5 m3/h
- Filtration fineness: 89 microns
- Model without pressure reducer
- 360 ° swivel connection
- Maximum water temperature: 40 °C
- Maximum ambient temperature: 40 °C
- Service pressure: 16 Bars
- Clean cartridge pressure drop: 0.2 bar

Installation must be carried out by a qualified person, in accordance with Min. Decree 37/08, following the instructions given in the technical manual.