Filter Sleeve Cintropur NW25 1 microns - by 5

SLEEVE NW32 FINESSE 1 MICRON

Cintropur 1 micron water filter sleeve to filter fine impurities from drinking water.

With a filtration threshold of 1 micron, the Cintropur sleeve can effectively eliminate the finest particles remaining in the circuit such as pollen, dust, rust and other materials likely to pollute your water.

Uses of the Cintropur sleeve

The Cintropur sleeve is mainly used for the filtration of drinking water. Thanks to its 1 micron filtration capacity, it can filter impurities that may remain after pre-filtration with other types of cartridges or bottle filters with sand, for example. It can be used in homes, business premises and all types of mechanical or food industries to treat water to make it cleaner and safer.
The Cintropur sleeve can also be used as a pre-filter for water filters with a specific treatment.
The Cintropur sleeve is a water filter used to filter only impurities in drinking water or other liquids. The sleeve is made of polyester for better resistance over time. It is easy to wash, making it an ideal choice for food uses.

The Cintropur sleeve is the size to be installed in the Cintropur NW23 filter models. It is compatible only with Cintropur filter models. It is available in sachets of five 1 micron sleeves, which makes it possible to always have a reserve of filters to replace it easily and regularly, in order to maintain effective filtration.

The advantages of the Cintropur filter sleeve

The Cintropur filter sleeve has many advantages. First of all, it allows the removal of impurities such as sand, pollen and other particles with minimum maintenance, since it is resistant and easy to wash several times, thanks to the purge placed at the base of the NW32 filter. The Cintropur polyester filter sleeve is also an ideal choice for food uses, with the ACS standard, because it is made of non-toxic and corrosion-resistant material. It provides effective drinking water filtration and is recommended for use with household water filtration systems.

How to replace the Cintropur sleeve?

Replacing the Cintropur sleeve is an easy and quick task.
Here are the steps to follow to replace the sleeve of your Cintropur filter:

1. Turn off the water supply to your filtration system.
2. Wash your hands before starting the procedure.
3. The thinner edge of the end of the cuff holder is provided for the lid.
4. The wider edge of the cuff holder receives the propeller.
5. Open the drain valve located at the bottom of the filter to empty the remaining water in the filter.
6. Unscrew the filter bowl by turning counterclockwise.
7. Remove the used sleeve by gently pulling it out of the plastic holder.
8. Clean the plastic holder with a clean, dry cloth.
9. Insert the new sleeve into the plastic holder making sure it is properly aligned.
10. Fold the cuff inside the holder on the thin-edged bit side first.
11. Fit the cover on the mouthpiece with the folded sleeve.
12. Fold the cuff inside the wide-edged end cap side bracket.
13. Install the propeller, fitting it lightly.
14. Pull on the edges of the folded cuff inside the holder to tighten it.
15. Replace the filter bowl by screwing it clockwise.
16. Open the purge valve to let air out of the filter.
17. Turn on the water supply to your filtration system and check for leaks.

It is recommended to replace the sleeve every 6 months to a year to ensure optimal operation of your Cintropur filter.