Filter Stainless steel 9-3/4 Inch + Drain - Head Bronze E/S 3/4 Inche

STAINLESS STEEL FILTER 9 INCH 3/4 - BRONZE HEAD In/Out 3/4

Housing with stainless steel tank to filter particles from hot or high pressure water.

Its filter head is in bronze with a 20/27 inlet compatible with all European screw threads.
In general, it is equipped with a dirt cartridge from 100 to 10 microns depending on the desired result. In some cases, the 316 stainless steel cartridge is necessary for a temperature above 65 ° C, for example or to meet industrial process standards.
The metal support is ideal for supporting the weight of the filter with the amount of water inside. If you want to install the filter on a pipe, you will have to put retaining rings on each side. The support can be deducted from the price of the set.
We also offer filter heads with an inlet up to 2 inches.

Technical characteristics :
- 316L stainless steel tank
- Bronze head
- Cartridges compatible with flat seals for nylon, stainless steel or coil models
- air purge Ø: 1/8 inch
- Lid closure by bronze ring
- Temperature from 5 to 90° C
- Maximum pressure: 15 bars
- Operating pressure: 4 bars
- Flow : 3 M3/H

Material supplied: Wrench tightening - Metal support
Material not supplied: fixing screws
Option: Tank with drain 1/2 inch
Filter coasts:
head width: 135 mm
Total height: 337 mm