Housing 9-3/4 Inch Head Bronze - in/out 1-1/2 inch

FILTER HOUSING BRONZE 9 3/4 INCH In/Out 1-1 / 2 "

Bronze head filter body with a flow rate of 5 m3/h for industrial use on a water circuit or other liquid to be filtered.

This cartridge housing can receive a wide range of filters from 0.1 micron to 150 microns depending on the desired result.
It will be necessary to choose among the specific cartridges with large opening diameter to suit the flow of water.
It is advisable to install it on a circuit that is already with a diameter of 1-1/2 inches, equivalent to 40/49 in plumbing.
The filter can be used to treat drilling water, raw water or city water.
The transparent tank allows to see the filter cartridge to know when to replace it.
You will be able to replace, if you wish, the tank of 9-3/4 inches by a tank of 20 inches. To maintain the filter body on the circuit, it is rather advisable to put collars attached to the wall on each side of the head.

If you want to use this filter holder for hot water, above 50° C, it is advisable to take the model with stainless steel bowl in place of the transparent bowl.
The bronze head gives it the advantage of withstanding a pressure of up to 10 bar.
Choose the input diameter from the options.
Optional equipment: bracket and wrench available on our website.

Characteristics :
- Food quality
- Transparent bowl treated with UV protection
- Max pressure: 12 Bars
- Operating temperature: 50° C
- Weight: 2,300 Kg
- Total height: 310 mm
- Flow rate: 5 m3/H

Dimensions :
Width: 133 mm
Height:

The bronze head has 4 holes for attachment to a bracket and a bleed screw.
The transparent bowl is anti-UV treated.
The clamping ring is made of bronze.

Material provided :
- Bronze head filter with transparent tank
- Clamping wrench