Filter holder hot water 9-3/4 inch 3/4 - Input 3/4 inch

FILTER HOUSING HOT WATER 10" : Enter 3/4 inch

It is used in technology and home to filter out impurities in the water, sand, silt, clay.

Its high-strength super-tight seals allows it to withstand temperatures up to 100°C.

Lets be installed in many applications: reverse osmosis, softener, water fountains ...

The filter holder in 3 parts is manufactured with quality materials, complying with FDA and EEC.

It is used for filtration of suspended solids in drinking water or well water. Its height of 10 "can adapt to many types of sediment cartridges from 1 to 25 microns.

It is designed to ensure maximum safety for filtering drinking water and also for the development of other liquids.

A support attachment (bracket) will help you easily install your filter housing.

The head and the ring are threaded plastic fittings opaquetandis that are equipped with internal female brass insert.

A special wrench is provided for easy screwing and unscrewing the main part of the room to replace the cartridge and clean the filter housing.

The seal ring is in FTEs.

It is very useful for reverse-osmosis to systhèmes, irrigation equipment, water softener as well as cooling machines and water fountains.

Depending on the type of filtration provided, simply choose a suitable cartridge.

We recommend a fine sediment cartridge 1 micron to treat municipal tap water for a reverse osmosis or purifier, and a 20 micron sediment cartridge to treat well water, rain or before the softener.

Height : 315 mm

Width : 133 mm

Maximum pressure : 7 bar at a temperature of 50° C

(Tested at a pressure of 21 bars)

Maximum operating temperature : +5 ° to +100° C at a pressure of 3 bar

The flow rate depends on the type of cartridge used.

Air valve.