Switch high pressure of RO

HIGH PRESSURE SWITCH

High pressure switch mounted at the exit of the booster pump to cut osmosis water under high pressure.

It cuts the water supply prior to filtration.
It acts like an automatic switch when installed on a 24V solenoid valve.
Place the switch to the RO water tank inlet and mount its power in series with the solenoid valve mounted on the water supply of your reverse osmosis.
Once the tank is full, the switch turns off the water.
It must be plugged into the 24V using with cable not included.
It will be connected to the flexible water tube with an angled 1/4 inch quick connect or law.