Pack cartridges with ceramic AP-680

PACK CARTRIDGE CLEANER AP3 + CERAMIC

Pack of 3 replacement cartridges for your purifier drinking water at 0.9 micron.

It consists of the prefiltration cartridge, a carbon block filter and finally the 0.9 ceramic hollow micron cartridge.

This filter is suitable for all potable water supplied by municipalities. It will ensure drinking water quality throughout the year.

These cartridges are compatible only with the purifier 680 AP3 or AP4.
Each ends, the tips are designed for a perfect seal with the O-ring.

The different stages of reverse osmosis filtration Aquapro with micro-filtration are:

Step One : Pre-filtration
The wound cartridge retains all the materials in suspension in water above 5 microns.
It is effective for sand, mud, dust, rust, algae.
It is changing every year.

Step Two : Filter chabon block
The cartridge has a good filtration, thanks to its large suface, to filter pollutants from the water.
5 micron pore filter and absorb odors, residual chlorine, chemicals, metal particles and bad taste.
It is changed every 6,000 to 9,000 liters.

Step Three : 0.9 micron ceramic cartridge
The water filter cartridge in order to retain microorganisms larger than 0.9 micron bacteria. Ele is to limit the proliferation of bacteria in drinking water.
It is important to locate the last three levels purifier because the water pressure must be low.
It replaces every year.