Water pressure reducer 3/8 inch 2.8 Bars

WATER PRESSURE REDUCER 3/8 INCH - 2.8 BAR

Fixed pressure reducer set to 2.8 bars irrespective of the supply pressure.

For a reverse osmosis unit installed on a water system where the pressure may be a little too high or with significant variations, the coupling limits the outlet pressure to 2.8 bar.
It plugs directly into the water system before the device through these quick fasteners.
It has not been tested with a pressure higher than 8 bar, so it is best to lower the pressure before the coupler.

It is possible to add it an elbow junction if necessary.

Made of PVC.
NSF and FDA standards.