I have seen this product cheaper elsewhere.
Share :

Filter holder 20 inch Big Blue In/Out 1 1/2 Inch

Reference - AQF-2050-112

Big Blue Filter Housing 10 inches for large water flow

Rating:0 opinion
With this article earn 60 Points
99.00 €
Warranty  Warranty 1 year
Quantity : 
Product available
Add to cart
Ask an estimate

BIG BLUE 20 INCH FILTER HOUSING : Input / Output 1 1/2 Inches


Big 20 inch filter body that can receive cartridges to retain or remove contaminants in a manufacturing or processing plant.

It is equipped with a 1-1/2 inch BSPT inlet allowing a maximum flow of 10 m3/h. A wide selection of 20-inch Big Cartridges are available on site to reduce impurities or harmful substances. The filter holder is supplied with its holder and the key to tighten the bowl when replacing the cartridge.
You can install two or three filters on the same circuit, in order to achieve the desired result.


It allows to filter the drinking water of a large house or a set of several apartments. On the city water network, the filtration will be chosen to remove fine materials and chlorine present in the water. On a drilling water, the Big filter will be used to hold large materials, or even turbidity greater than 2 NFU, by putting a polypropylene cartridge of 100 microns after the pump.

It is used to filter water in industry due to very high flow rate.
It is installed in many applications: industrial reverse osmosis.
The filter holder is made of high-quality EEC-compliant polymer with 1 decompression button for purging when opened.


Height: 594 mm
Width: 184 mm
Maximum pressure: 6.2 bar at a temperature of 20° C
(tested at a pressure of 21 bar)

Input / Output 1 inch: 40/49 mm
Maximum water temperature: 37° C
MAX. with optimal filtration: 10 m3 / h
(variable depending on cartridge installed)

Back to top

Reviews about this Filter holder 20 inch Big Blue In/Out 1 1/2 Inch (0 reviews)

There is no review for this item.
Back to top