Stainless Steel Filter 9-3/4 Inches 316 In/Out 3/4 + Drain

316 STAINLESS STEEL FILTER 9-3 / 4 INCHES In/Out 3/4 + DRAIN

316 stainless steel filter equipped with a tank with drain allowing cleaning after filtration.

The casing is designed to receive a purge valve at the base of the tank, but in the event that it is not used, the stainless steel cap will retain the properties as the standard model.
You have the choice of the cartridge to filter the liquid according to the desired result. For polypropylene cartridges, it is advisable to use coils from 1 to 100 microns. If you want to install a stainless steel cartridge for your production line, a wide range is available between 5 and 1000 microns. For water filtration with a temperature above 80° C, you can reduce the cost of the cartridge by putting a cotton coil with a steel shaft. Contact us to choose the filtration threshold.
The clamping of the head with the tank is done by a collar with butterfly screw. This filter model replaces the classic model,

Areas of use :
Food industry: fruit juice, oil filtration, wine filtration.
Water treatment: Filtration on production line, cutting nozzle protection, fire circuit.
Cosmetic industry, Mechanical industry, chemical industry.

Certifications : CE - ACS