» » » » » Transparent filter housing 7 Inches - Entry 3/4 inch
I have seen this product cheaper elsewhere.
Share :

Transparent filter housing 7 Inches - Entry 3/4 inch

Reference - PM-SILA7E

Filter housing 7 inches with transparent tank

Rating:0 opinion
With this article earn 19 Points
33.00 €
Warranty  Warranty 1 year
Quantity : 
Product available
Add to cart
Ask an estimate



Filter housing with transparent tank to use standard cartridges 7 inches.

The filter model is installed in some filtration station before a softener, an industrial washing machine or a water dispenser.

All types of cartridges are compatible as long as the center hole is 27 mm.
The filter housing has to filter only cold water to a maximum temperature of 40°C.
We offer different dirt-7-inch cartridges puromelt from 1 to 25 microns depending on your needs.
It has been tested up to 10 bar pressure. The decompression screws allows to get air into the filter body, when replacing the cartridge, to view the disassembly key provided without problems.
The fact that it is transparent, to the benefit of viewing the status of the cartridge before replace light French manufacturing filter holder is certified ACS to guarantee the best food quality.


Taking this filter holder, you can change whenever you want, to move the tank on a 9 3/4 inches or even 20 inches depending on the volume of water to be filtered at a time. The flow will be the same since you will remain on an entry in 20/27.


Compatible cartridges : 7 inches = 177 mm - Anti-dirt or carbon block
Brass insert input : 3/4 inch = 20 to 27 mm
Mounting wrench and plastic support provided for a perfect installation of the hardware.



Back to top

Reviews about this Transparent filter housing 7 Inches - Entry 3/4 inch (0 reviews)

There is no review for this item.
Back to top