Filter housing 20 inch Transparent Input 3/4inch Brass

FILTER HOUSING TRANSPARENT 20 INCHES + OUT BLEED 1/2 INCH : With Input/Output 3/4 "Brass

Filter housing 20 inches to achieve a self-cleaning to purge water of the transparent vessel.

The threaded hole in the bottom of the tank is 1/2 inch threaded gas.

You can him install a stop valve 15/21 which will empty the water in the tank as soon as you wish.

This water filtration system will be used especially when a washable dirt-cartridge nylon.

This filter housing 20 inches with transparent tank ACS to French standards.

You can also perform a water filtration plant for residential barge or by connecting it to a triple filter 20 inches.
Its purpose will be to filter sand, mud, clay, algae in drinking water to 60 microns or larger on request.

It filter large volumes of water to power devices in a private or a professional.

We provide the filter assembly key needed for opening and closing the clamping ring of the vessel, but also the special plastic support which will support the weight of the filter assembly with the drinking water flowing inside.

The filter head is provided with an inlet/outlet 20/27 or 3/4 inch with brass insert.
Good quality O-ring is in FTEs.

This filter holder is suitable for business use, commercial, industrial or domestic.

Compatible cartridges height : 508 mm
Width : 133 mm
Maximum pressure: 5 bar at a temperature of 20°C.
(tested at a pressure of 21 bars)
Maximum operating temperature : + 5° to + 45°C at a pressure of 3 bar
The flow rate will depend on the type of cartridge used.
Air valve.

Equipment provided :
- 1 spanner
- 1 wall plastic support