20 inch Big 100 micron Coil Cartridge

20 INCH 100 MICRON BIG COIL CARTRIDGE

20 inch cartridge specific to the Big Blue filter to retain particles greater than 100 microns in water.

It is recommended for loaded water from a borehole provided that the turbidity does not exceed 2 NFU. It will be installed at the start of filtration to protect the following cartridges. It can be used at the outlet of the wastewater network on a circuit in a production chain to reduce the material before discharge into the sewers.
The cartridge supports high pressures up to 7 Bars.

Thanks to the 1 inch or 1.1/2 "inlet of the Big-Blue filter, the flow rate remains high at nearly 70 L / minute.

It retains all the solids suspended in the water: algae, sand, mud, pollen, rust.
The cartridge is made of polypropylene thread in a coil without any additives.

It does not release any material into the water.
Its graduated density from the outside to the inside improves the efficiency of filtration or pre-filtration.
The filter supports a large number of fluids, such as oil, acid, emulsions and syrups.
It is advisable to change the cartridge each time the pressure drops by 1 bar, in order to guarantee good water quality.
It is suitable for all domestic and industrial drinking water: borehole water, well water, municipal water.
Can be used in a 20 inch filter holder, ie between 508 mm long.
It is suitable for use in a food or medical environment, thanks to international standards.

Cartridge Dimensions:
Internal diameter: 26 mm
Length: 20 inches = 508 mm
External diameter: 120 mm
The cartridge is NSF - ACS certified.